Frequently Asked Questions

• A Series — classic single-table open machines. Optimal for versatile jobs and smaller fabrication shops. • C Series — full protective enclosure and automatic shuttle table exchange (two pallets in 10–15 s) for safe batch cutting. • SC Series — next-generation high-speed enclosed systems with 10-second pallet exchange and reinforced bed. • P Series — heavy-duty industrial flagship with up to 4G gantry acceleration for 24/7 non-stop workloads. • X Series — ultra-high power systems (up to 60 kW) designed for thick plate processing and peak productivity.

For carbon (mild) steel, Oxygen (O2) is used to maintain exothermic combustion, or high-pressure dry air at 16+ bar. For stainless steel, aluminum, and copper alloys, Nitrogen (N2) with 99.99%+ purity is used, producing a bright, dross-free edge without oxide scale.

All laser systems include an official 3-year warranty with full field engineering support. Proprietary BodorPower laser sources qualify for an extended 5-year warranty under scheduled certified maintenance. Our Ukrainian team provides certified commissioning, operator training, and fast component replacement from a local warehouse.

A dedicated tube laser combines cut-to-length sizing, complex hole cutting, beveling, and interlocking joints into a single setup without wall deformation. High chuck speeds (up to 200 RPM on K-series) and near-zero tail waste minimize component production costs.

Welding speed is 4–10 times higher, heat-affected zone is minimal (preventing thermal distortion), and welds need no post-grinding. The BodorWelder Air model uses direct air cooling without a liquid chiller and operates smoothly between -20°C and +40°C from standard mains.

A 3-phase 380V ± 10%, 50 Hz power supply with ground resistance below 4 Ohms is required. For sources of 6 kW and above, a dedicated voltage stabilizer is recommended. The floor must have a reinforced concrete slab of 150–200 mm isolated from shock-vibrating stamping equipment.